Mineral, hydrophobic renovation filler based on the former plaster mortar group P II (DIN 18550:2005-04) or CS II (EN 998-1). For the over coating of load-bearing ETICS coatings (1–10 mm). Recommended fabric filler on old paint after tear-off test.
Material base
White hydrated lime
White special cement
High-quality Marble fine sand
Addition of fibres
Additives to improve processing properties
Organic share <5%
Processing information
Building wall outside / inside
Use at a temperature between + 5 °C and + 30 °C
Apply with a trowel
Finish with a trowel
Apply with a plastering aggregate
Protect from sun and rain
Mix before use
Application examples
Historic cellar vault in Landshut receives aerogel thermal insulation plaster system
A significant challenge was the interior insulation on the historic vault (ground floor) and walls on the first floor. However, this was easily managed with the aerogel insulation plaster system.
Are you interested in a product or do you need consulting?