Merkliste
1

HASIT PI 262 ÖKOSIL PLUS
Silicate interior paint

HASIT PI 262 ÖKOSIL PLUS
  • Highly diffusion-open and moisture-regulating
  • High coverage
  • Very good wet abrasion resistance
Item no.Packagel/unitunit/Pal.Consumption
2000955312 Bucket 5 l/unit 64 unit/Pal. -
2000954342 Bucket 5 l/unit 64 unit/Pal. 0.145 l/m²/c.
2000955313 Bucket 12.5 l/unit 32 unit/Pal. -
2000954343 Bucket 12.5 l/unit 32 unit/Pal. 0.145 l/m²/c.
2000955314 Bucket 15 l/unit 24 unit/Pal. -
2000952784 Bucket 15 l/unit 24 unit/Pal. 0.145 l/m²/c.

What information regarding this product are you interested in?

Add to bookmarks Remove from bookmarks

Technical documents

TDS HASIT PI 262 ÖKOSIL PLUS Silicate interior paint en
pdf
1 MB
Add to bookmarks Remove from bookmarks
Download
MSDS HASIT PI 262 ÖKOSIL PLUS Silicate interior paint en
pdf
366 KB
Add to bookmarks Remove from bookmarks
Download

More recommended products

HASIT PP 201 SILICA LF

HASIT PP 201 SILICA LF

Silicone deep precoat and diluent

View product Find specialist dealer
HASIT PI 276 ÖKOSIL QUARZ

HASIT PI 276 ÖKOSIL QUARZ

Silicate brush-on plaster interior/exterior

View product Find specialist dealer

Benefits of this product

Benefits of this product

Highly diffusion-open and moisture-regulating

High coverage

Very good wet abrasion resistance

Mineral silicification on mineral substrates

Mineral, fine surface

Pollutant-free (VOC)

TÜV tested and healthy for living

Prevents mold thanks to its pH value

Product description

HASIT PI 262 ÖKOSIL PLUS

Abrasion-resistant, TÜV-tested, mineral, highly opaque, ready-to-use, highly diffusion-open ELF interior paint, based on silicate (potassium silicate), according to DIN 18363. For painting dry, mineral plasters. Processing from 8 °C. Limited tinting capability. Wet abrasion class 2 – covering capacity class 1 at 6 m²/l according to EN 13300.

Prime absorbent substrates using HASIT PP 201 SILICA LF, pre-prime plasterboards and pure gypsum substrates using HASIT PP 317 ISOGRUND LF.

Material base

  • Binder: Potassium silicate
  • Organic additives less than 5 %
  • Pigments: titan dioxide, mica, calcium carbonate, aluminium silicate
  • Fillers: calcium carbonate, silicates, marble flour
  • Additives: Resources for re-netting, defoamers

Processing information

Building wall inside / building ceiling inside
New building
old building
Use at a temperature between + 8 °C and + 30 °C
2. Layer shall be diluted with max. 5% PP 201
1. Layer shall be diluted with max. 20% PP 201
Apply with the roller
Apply with brush
Airless spraying
Storage 12 months, protect from the weather
Mix before use
Attention! Protect hands and eyes

Application examples

Energy-ecological renovation with aerogel insulation plaster system in Ingelheim

Energy-ecological renovation with aerogel insulation plaster system in Ingelheim

Expertly insulated with the aerogel insulation plaster system and wrapped in lime renovation and finishing plaster, the parish center shines with new brilliance.

Read more
Historic cellar vault in Landshut receives aerogel thermal insulation plaster system

Historic cellar vault in Landshut receives aerogel thermal insulation plaster system

A significant challenge was the interior insulation on the historic vault (ground floor) and walls on the first floor. However, this was easily managed with the aerogel insulation plaster system.

Read more
Are you interested in a product or do you need consulting?

Are you interested in a product or do you need consulting?

Contact us! We will get back to you with advice.

We stand for:

Coordinated logistics

Excellent quality

Individual consulting

Contact form