HASIT PI 263 ÖKOSIL IN
Silicate interior paint

HASIT PI 263 ÖKOSIL IN
  • Highly diffusion-open and moisture-regulating
  • Good coverage
  • Mineral silicification on mineral substrates
Item no.Packagel/unitunit/Pal.Consumption
2000006223 Bucket 5 l/unit 64 unit/Pal. -
2000952786 Bucket 5 l/unit 64 unit/Pal. 0.145 l/m²/c.
2000955310 Bucket 12.5 l/unit 32 unit/Pal. -
2000954341 Bucket 12.5 l/unit 32 unit/Pal. 0.145 l/m²/c.
2000955311 Bucket 15 l/unit 24 unit/Pal. -
2000952787 Bucket 15 l/unit 24 unit/Pal. 0.145 l/m²/c.

Technical documents

TDS HASIT PI 263 ÖKOSIL IN Silicate interior paint en
pdf
1 MB
MSDS HASIT PI 263 ÖKOSIL IN Silicate interior paint en
pdf
366 KB

More recommended products

HASIT PP 201 SILICA LF

HASIT PP 201 SILICA LF

Silicone deep precoat and diluent

HASIT PI 276 ÖKOSIL QUARZ

HASIT PI 276 ÖKOSIL QUARZ

Silicate brush-on plaster interior/exterior

Benefits of this product

Benefits of this product

Highly diffusion-open and moisture-regulating

Good coverage

Mineral silicification on mineral substrates

Mineral, fine surface

Pollutant-free (VOC)

TÜV tested and healthy for living

Prevents mold thanks to its pH value

Product description

HASIT PI 263 ÖKOSIL IN

Proven and TÜV-tested mineral paint based on silicate (potassium silicate). Ready to apply, highly diffusion-open, very good coverage, emission-free and solvent-free. For painting dry, mineral plasters indoors, according to DIN 18363. Processing from 8 °C. Limited tinting capability. Wet abrasion class 3 – covering capacity 1 at 6 m2/l according to EN 13300.

Absorbent substrates such as new plaster must be primed with HASIT PP 201 SILICA LF, plasterboard and pure gypsum substrates with HASIT PP 317 ISOGRUND LF. Dilution with HASIT PP 201 SILICA LF.

Material base

  • Binder: Potassium silicate
  • Organic additives less than 5 %
  • Pigments: titan dioxide, mica, calcium carbonate, aluminium silicate
  • Fillers: calcium carbonate, silicates, marble flour
  • Additives: Resources for re-netting, defoamers

Processing information

Building wall inside / building ceiling inside
New building
old building
Use at a temperature between + 8 °C and + 30 °C
2. Layer shall be diluted with max. 5% PP 201
1. Layer shall be diluted with max. 20% PP 201
Apply with the roller
Apply with brush
Airless spraying
Storage 12 months, protect from the weather
Mix before use
Attention! Protect hands and eyes
Are you interested in a product or do you need consulting?

Are you interested in a product or do you need consulting?

Contact us! We will get back to you with advice.

We stand for:

Coordinated logistics

Excellent quality

Individual consulting